Switches & Indicators

Change over or on/off/on, three position, single pole switch, with rubber sealing gaiter over nickel plated brass lever, 6.3mm blade terminals, 13mm panel hole. 10 amps at 28 volts dc...

5 position switch, accessory/off/accessory and ignition/ pre-heat/start, 26mm diameter panel hole. Protected to DIN400050, IP64. With single common 14607 keys.

Push button single pole switch, push to momentarily make, screw terminals, 22mm panel hole up to 8mm deep. 12.5 amps at 12 volts dc rating.

Momentary on, push button, single pole miniature switch, with plastic button and 2.0mm solder tags. 7mm panel hole. 0.5 amp at 30 volt dc rating.

Momentary on, single pole, push button switch, 12 volt red LED illumination, screw terminals, 22mm panel hole. 20 amp at 12 volts dc rating.

Push button, single pole switch, push to momentarily make, with rubber sealing gaiter and boot, screw terminals, 22mm panel hole. 12.5 amps at 12 volts dc rating

Momentary on, push button horn switch, single pole with screw terminals. 5 amps at 12 volts dc rating. Replaces SPB160

Push on/push off, single pole switch, with metal button and 6.3mm blade terminals, 13mm panel hole. 6 amps at 12 volts dc rating.

Push on/push off, single pole miniature switch, with plastic button and 2.0mm solder tags, 7mm panel hole. 0.5 amp at 30 volt dc rating.

On/off, single pole switch, plastic rocker. 12/24 volt red LED indicator, 4.8mm blade terminals. Snap fits into 20mm diameter panel hole. 10 amps at 12 volts dc rating.

Battery isolator with removable key and splashproof cover. Rated 100 amps at 24 volts and 500 amps for 5 seconds. M8 studs and requires 24mm hole.

For 5 seconds. M10 studs and requires 19.5mm hole. Replaces SSB106. Battery Isolator with Fixed Key - 100A24v

For 5 seconds. M10 studs, requires 19.5mm hole and two 4mm fixing holes. Replaces SSB103.

Durite’s Single Pole Single Throw On/Off Isolator with removable handle. Used for isolating vehicle battery's. 24VDC Max. 150A Continuous. 1000A Max for 5 Seconds. M10 Terminals Tightening Torque 0.9+ -...

Marine battery isolator with removeable control knob (in the 1 or 2 position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. Selects...

Marine battery isolator and change over switch with solid copper contacts. Rated 310 amps continuous and 500 amps for 5 minutes, max 36 volts dc. Selects between batteries one, two,...

Marine battery isolator with removeable control knob (in the off position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. M10 studs. l...