Direct Auto electrics offer switches, these essential components in vehicle electrical systems, enabling the control and management of various electrical functions. These switches serve different purposes, and their design and functionality vary significantly depending on the application. Here is an overview of the range of auto electrical switches we supply,
Ignition Switch: Controls the electrical power to the engine and allows the driver to start and stop the vehicle.
Type of Actuation: Can be toggle, push-button, rocker, rotary, etc.
Weather Resistance: Some switches are designed to withstand harsh environmental conditions, making them suitable for outdoor use.
Marine battery isolator with removeable control knob (in the 1 or 2 position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. Selects...
Marine battery isolator with removeable control knob (in the off position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. M10 studs. l...
Marine emergency cut-off switch with lanyard, cut-out can also be operated with lanyard clip in place by pressing knob, suitable for coil or magneto ignition. 6.3mm blade terminals, 16mm panel...
Change over or on/off/on, three position, single pole switch, with rubber sealing gaiter over nickel plated brass lever, 6.3mm blade terminals, 13mm panel hole. 10 amps at 28 volts dc...
On/off, push-push single pole switch, with 12/24 volt LED indicator and 4.8mm blade terminals. Snap fits into 20mm diameter panel hole.20 amp at 12 volts / 10 amp at 24...
Illuminated change-over or on/off switch, LED changes from red to green. Single pole single throw, 6.3mm terminals, 11mm diameter panel hole. 30A at 24V rating.
Battery isolator with removable key and splashproof cover. With independent ignition switching and controlled earth leakage through a resistor to avoid damage through load dumping. Rated 100 amps at 24...
Emergency push button battery isolator. Turn button 45° to switch on, push to disconnect. Rated 150 amps at 48 volts and 1000 amps for 10 seconds. M8 studs and requires...
Durite’s Single Pole Single Throw On/Off Isolator with removable handle. Used for isolating vehicle battery's. 24VDC Max. 150A Continuous. 1000A Max for 5 Seconds. M10 Terminals Tightening Torque 0.9+ -...
Marine double pole battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. Connects or disconnects both poles simultaneously. M10 studs.
Battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. M10 studs and requires 30.5mm hole. Replaces Ford / Iveco 4822229.